Forged In Flame - A Pride Enamel Pin Collection

Forged In Flame - A Pride Enamel Pin Collection

An enamel pin set for the modern era, replacing bricks with swords forged in flame.
Edit
$10,958 🎉
of $500
300
backers

Get a Backer Train Started Start a Backer Train

Share the project to start a Backer Train Back the project to start a Backer Train

Ends on at .
Share

Share

Twitter

Bluesky

Facebook

Copy Link

Edit
Hello! My name is Marachi, I am a trans/NB and neurodivergent artist, it's 2025, and I'm very tired! This pin set is one I've wanted to make for a while and so now's finally the time. Please enjoy this collection of weapons and mythos that serve as gentle encouragements that hate is, in fact, a skill issue. :)

Back in the first 48 hours or be a returning backer to receive special freebie stickers!
Edit
This set of 8 pins will have the following specs:
  • Black Nickel Plating
  • Around 2-2.5" In Size (each pin will be sized as to match the rest of the set)
  • 4-6 Enamel Colours
  • 2 Pin Back Posts
  • Butterfly Clasps

$500 - Transphobia - Yatagarasu - Three Daggers


$750 - Xenophobia - Suzaku - Dual Swords


$1000 - Protect Trans Kids - Kitsune - Flail


$1250 - Misogyny - Tomoe - Harpoon


$1500 - Homophobia - Kirin - Axe


$1750 - Racism - Byakko - Sword And Shield

$2000 - Bigotry - Oni - Club


$2250 - Ableism - Seiryu - Lance

 

If we hit 10k I will add a set of pride flag sword collar pins!

There will not be any additional stretch goals at this time! If we smash the goal and then some by a big margin, I'll probably donate some funds to organizations working hard to protect the rights and lives of marginalized folks in the US.
Edit
I am so excited to share I am collaborating with Royarach for this campaign! We have been on group collaborations such as Oddities and Obscura before and I'm a big fan of their work! If you pledge to both of our campaigns, you will get a freebie pin from both of us!

Please check out Royarach's campaign, Mythical Pride Heraldry Pins Series 2!

Edit
You will be prompted to add on items if you wish when you select a pledge level. Here are all the options and prices!

  • Forged In Flame Pins: $20 each
  • Forged In Flame Stickers: $5 each
  • Pre Order Swords: $25 each
  • Previously Made Swords: Between $15-$30 each

There will not be any stretch goal add-ons just to keep things simple this time!
Edit
Shipping fees will be collected and charged AFTER the campaign is over and is not included with your pledge. Please keep this in mind when budgeting and filling out your surveys!

SHIPPING ESTIMATES
These prices are estimates and are subject to change. All packages are charged shipping based on the final package weight. Ordering add-ons may incur additional shipping fees. Prices are listed in USD.

USA (Domestic)
  • 1 Pin: $5 USD
  • Medium Set (6+ Pins): $8 USD
  • Full Set (13+ Pins): $15 USD

Canada (International)
  • 1 Pin: $11 USD
  • Medium Set (6+ Pins): $18 USD
  • Full Set (13+ Pins): $25 USD

Australia/New Zealand (International)
  • 1 Pin: $15 USD
  • Medium Set (6+ Pins): $25 USD
  • Full Set (13+ Pins): $35 USD

Everywhere Else (International)
  • 1 Pin: $15 USD
  • Medium Set (6+ Pins): $25 USD
  • Full Set (13+ Pins): $35 USD

UK and EU Backers
Thank you for your interest! UK backers - please pledge to the specific UK tier so you can be sent a special survey later! This will also give you access to backer updates so you can follow along with manufacturing/fulfilment progress. 

I will make a custom Etsy listing for you for your pledge tier, add-ons, and shipping when the project is ready to ship. Please keep in mind that you will be charged tax fees on top of the shipping cost.

***I am not responsible for any additional tax or import fees incurred upon receipt of your parcel.***

EU Backers
I'm very sorry but at this time I am no longer able to fulfil orders to France, Germany, and the rest of the EU due to changing laws that I as a small business simply cannot keep up with. If you have access to an alternative address not in the EU, you are more than welcome to pledge to the appropriate pledge tier. Thank you so much for understanding.
Edit
  • June 16th: Campaign launches!
  • June 30th: Campaign ends
  • Mid July: Surveys sent
  • Every Friday Until Surveys Close: Completed surveys locked and cards charged
  • July 30th - Deadline to request a refund
  • August 16th: Surveys due (no surveys accepted after this date)
  • Mid August: Manufacturing begins
  • October: Pin grading
  • November: UK + EU backers are charged via Etsy
  • November-December: Begin fulfilment and shipping

This timeline is an estimate and delays may occur at any stage. I will keep backers informed about any delays and issues. 

Edit
My name is Lachlan but you may call me Marachi if you want! My pronouns are they/them and I am a long time convention artist, webcomic artist, and professional nerd. I love painting with vibrant colours and a fun style, and enjoy making fun and unique nerdy gifts and pieces. I started making enamel pins in 2020 and ran four successfully funded enamel pin crowdfunding campaigns: Wild Card, Elemental Tea Time 1 & 2, and Pop Culture Swords. I was a participant in BackerKit's Pintopia 2 in early 2024 and will be making many many more pins in the future! I also have a long-running comic called Year of the Marachi that's available on Webtoon!

Follow Marachi online on Instagram, Tumblr, Etsy, my website, BlueSky, and Patreon! I'm probably other places too but I don't post as often there. :)

Edit



I have run three successful Kickstarter campaigns, two of which were enamel pin campaigns, and three successful BackerKit pin campaigns. My first pin campaign, Wild Card, was able to fund 9 pins in total. My second campaign, Elemental Tea Time, was funded in under 15 minutes, raised over 60k from over 500 backers, and funded 51 pin designs. For Pintopia 2, I was able to fund an additional 6 tea pin sets, a premium stained glass pin, and the first round of sword pins which have been very popular at conventions. Last Fall, I funded my first fan art pin collection with Pop Culture Swords, funding 9 designs total. I have also since designed a handful of pins, including a pin for a collaborative campaign called Heaven and Hell 2 led by artists Jaizure and Pokettoni. I am just off the heels of my most successful BackerKit pin campaign, Animal Talismans, which raised over 25k between the campaign and pre-orders! I hope to continue making pins for a long time!

I will be using the same manufacturer for Forged In Flame as I have with all my previous pins. I have a great relationship with my company and they always deliver with the highest quality as you can see from the pin examples above.

Previous campaigns saw some manufacturing hiccups, particularly with non-pin merchandise, so I am being very careful with samples and using trusted manufacturers to guarantee the best possible quality, the least amount of issues, and the fastest possible fulfilment. I promise to bring you some amazingly beautiful pins!
Edit



Edit

Refunds and Exchanges
Refunds must be requested within 30 days of the campaign's ending. I will not accept refunds after May 3rd - no exceptions. If your rewards are damaged in transit, please message me directly with photos of the damage and we will work out a solution together.

Surveys
Surveys will be sent out after the campaign and are mandatory to fill out in order to receive your rewards. You will be charged shipping at this time as well. You have until August 16th to fill out your surveys. Not completing this step will result in you not receiving your rewards.

Surveys will lock every Friday until August 16th. Cards will also be charged as surveys lock. This is to ensure accurate counts, especially with this project being bigger and more complicated. Shipping will not lock until fulfilment for all tiers is ready.

Forfeiture of Rewards
If you do not complete your survey before August 16th, including fixing any errored payment methods, you forfeit your pledge and rewards and will not receive them. Please make sure to take care of everything before August 16th or message me before that cut off if you wish to receive your rewards.

Import Fees
I am not responsible for any additional import fees or taxes that may be incurred during the shipping process for international (outside of the US) orders.

Grading
All pins are graded by hand for quality assurance. Please keep in mind that pins are handmade items and as such are prone to inconsistencies. This can include minor cosmetic imperfections.

A Grade/Standard grade imperfections include but are not limited to:

  • minor surface scuffing on the enamel or metal plating
  • very small specs of dust in unnoticeable areas
  • minor/unnoticeable enamel underfill
  • minor/unnoticeable air bubbles
  • slightly offset screenprinting on pins that have it

More major imperfections will be graded as Grade B or C depending on the severity. When you receive your pin, please know that you are receiving the highest quality pin possible even if there are minor imperfections present. 

Final Product Expectations
The images used in this campaign are artist mock ups and not the final product. I am working very closely with my manufacturer to ensure the final product is as close to the mock up as possible but changes to the designs are inevitable in order to guarantee the highest quality. While I have done my best to minimize such changes, please expect a slight variation between the mock up and the final product. I will share production pictures as I receive them. 
Edit

Every campaign is prone to risks and challenges. Here are some common reasons for fulfilment and manufacturing delays:
  • Manufacturer delays due to quality control problems, needing to tweak a design for better production, or national/company holidays
  • Having to change manufacturers because the original manufacturer had an issue with quality/vision/communication/etc.
  • Shipping delays due to high volume of shipping, reduced workforce, distribution center problems, or customs hold-ups
  • Illness or other emergencies
  • My very chaotic convention schedule
  • MOVING!! I am currently moving (hopefully settling somewhere in July) and will likely move AGAIN before I get to fulfil this campaign!

If the pins I receive have a consistent minor imperfection, pins with that imperfection will be considered Standard/A Grade. If the pins have a more major imperfection, I will have them remade which will take more time. I have yet to need to do this, but in the event that I do I will communicate this via updates, as well as any other cause of delays. 

I am also just one person, and one who travels often for work and has chronic health problems. Please be understanding if I am a bit slower than you would like me to be, and of course if any major problems arise I will always communicate with you via updates if/when they arise. 

All that being said, here is a list of things I am doing or already have done to ensure there are as few problems as possible!
  • I am already communicating with my manufacturer about these pins. I have sent in the final vector artwork and they are preparing it for production. We should be able to start production immediately after surveys are locked!
  • This is a pin focused campaign! I'm only adding other kinds of rewards if the funding amount goes high enough. Like, stupid high.
  • There will be no backing cards for this campaign. Pins will be sent out in the bags they come in from my manufacturer. Sorry - my hands hurt and pins are harder to store with cards!
  • I already have most of the shipping supplies I'll need for fulfilment and can easily order more if the campaign is more successful than I am anticipating. 
  • I will be working on the survey while the campaign is running so *optimistically* I will be able to send it out immediately after the campaign ends. 
  • Moving is sure chaotic but my spouse will have a much lighter work schedule with his new job so I can recruit him to help >:)

I am doing my best to keep this campaign simple and organized, and hope that means that I will be able to get you all your pins quickly! 

And as I've said, I will communicate any problems via updates. 

Thank you for your understanding and trust! We got this!!!
If you believe that this project is not in compliance with BackerKit’s Community Guidelines or Terms of Service, you can file a report by sending a message via this link: Report this project