You should already have received an email about this, but your cards should be charged for the shipping in the next two days (so by the 27th of August).
As a reminder, this is the standard shipping without any form of tracking. If you want to get tracking you will have to buy it separately via an 'add-on' from my own site. You can find the details about all that in the previous update here.
Shipping is going to take me a while as I have a lot of things overlap, but I hope to get it all over and done with before the end of September, I'll keep you all updated.
Thanks again for supporting this campaign - I hope these little troublemakers will be with you soon!
So this a super un-fun update I really didn't want to be making, but due to various things in Backerkit not working as I expected them to I'm unfortunately going to have to ask everyone who wants to add tracking to their shipping method to purchase this separately from my site.
How does this work?
- You will be charged the standard, untracked, shipping rate via Backerkit - If you want to add tracking to this you will need to purchase this as an item from my own site over here
IF YOU WANT TO ADD TRACKING PLEASE PURCHASE THE UPGRADE BY AUGUST 31ST
I'm aware this is a real pain for all of you, I wish I could run everything through Backerkit but their add-on section is broken for me (I can't manage any items). It'll take a lot of back and forth to get this sorted and right now I don't want to do that... I just want to get the shipping started as soon as I can!
I know I'm a little bit 'ahead of time' with this as I haven't charged you standard shipping yet, but I want to get things out as soon as possible once all the payments have cleared.
I've set up all the details for the shipping, which is under review, and if all goes well you should expect to see the charges for it some time next week: I will make an update with the exact date the moment Backerkit has approved the shipping.
Below you can a list of what to expect to be charged for the standard shipping, 3 pins will sit in the 0 - 99 grams weight range, if you have more than 3 pins it'll be in the tier above it.
Hopefully everything is clear and working as intended but if not please get in touch with me via a comment below or send me an email at [email protected]
I've finished grading and all is well - well, except for the huge amount of seconds which will need homes, but we have plenty of standard units for fulfilment so we can go ahead with everything!
As is normal for my campaigns I will be running a backer store on my own site for a little time before fulfilment starts. Here you will be able to pick up heavily discounted pin seconds, as well as a limited quantity of standard grade pins.
The reason I do this via my own site rather than Backerkit is that inventory is far easier to manage this way - also my payment processing fees are superior, which is why I can offer those seconds so cheap.
Shipping will be free (and you can also grab other items from the site) as the items will be combined with your Backerkit order. Just put the discount code below in the discount code box on checkout and it'll remove the shipping cost.
Please note that the shipment method you select on this site will not influence the shipping method your order is sent with, this will still be determined by Backerkit shipping which should get impounded around the 28th of August (more info on that will follow in the upcoming week).
Please make certain to use the same address for your order as your Backerkit pledge, if I can't match the two orders I will cancel it.
Hopefully everything works as it should but if not, please drop a comment below and I'll look into it as soon as I can!
Thanks again for helping me make these kobolds a reality, I can't wait to send them on their way to you!
I'm still in the middle of pin grading hell (actually, I think I'm not even halfway there), but here are some photos of all the hard enamel pins as promised.
That's all I have to share for now, talk more after I'm done grading everything!
Today the pins arrived in my sticky little kobold hands (after the FedEx import jobsworth decided to charge me far too much import tax for them, but like any Europe based person will know that's just the way the cookie crumbles here and you budget for it).
Now the fun part of grading the darned things starts. I've managed to a little over 300 today which is a decent start, but it's going to take a while as there's... a lot. Once I've finished grading I will be launching the Backer store where you'll be able to buy seconds (and maaaaybe some standard grade) to add to your pledge. A future update awaits.
Anyway, I haven't taken photos of all the pins yet, just checked if all the designs are here (they are), but I can share a couple of photos.. I'm personally stupidly excited about the soft enamel pins - my camera doesn't actually manage to show how neon the colours are but trust me, the colours are so vibrant irl.
You can expect some more photos in the next couple of days, but for now have these and I'll see you again in the next update real soon!
Our bright kobolds
Onwards to slay some adventurers!
Tubs and tubs of pins to grade...
Time for a very short but exciting update - I got the first pin sample photos (sorry, that second one is a bit wonky) in from the manufacturer. It's just the soft enamel pins for now but I think they're looking awesome!
I'll be back with another update once I get the raw casts in from the other designs but until then that's all!
You should already have received an email about this, but your cards should be charged for the shipping in the next two days (so by the 27th of August).
As a reminder, this is the standard shipping without any form of tracking. If you want to get tracking you will have to buy it separately via an 'add-on' from my own site. You can find the details about all that in the previous update here.
Shipping is going to take me a while as I have a lot of things overlap, but I hope to get it all over and done with before the end of September, I'll keep you all updated.
Thanks again for supporting this campaign - I hope these little troublemakers will be with you soon!
So this a super un-fun update I really didn't want to be making, but due to various things in Backerkit not working as I expected them to I'm unfortunately going to have to ask everyone who wants to add tracking to their shipping method to purchase this separately from my site.
How does this work?
- You will be charged the standard, untracked, shipping rate via Backerkit - If you want to add tracking to this you will need to purchase this as an item from my own site over here
IF YOU WANT TO ADD TRACKING PLEASE PURCHASE THE UPGRADE BY AUGUST 31ST
I'm aware this is a real pain for all of you, I wish I could run everything through Backerkit but their add-on section is broken for me (I can't manage any items). It'll take a lot of back and forth to get this sorted and right now I don't want to do that... I just want to get the shipping started as soon as I can!
I know I'm a little bit 'ahead of time' with this as I haven't charged you standard shipping yet, but I want to get things out as soon as possible once all the payments have cleared.
I've set up all the details for the shipping, which is under review, and if all goes well you should expect to see the charges for it some time next week: I will make an update with the exact date the moment Backerkit has approved the shipping.
Below you can a list of what to expect to be charged for the standard shipping, 3 pins will sit in the 0 - 99 grams weight range, if you have more than 3 pins it'll be in the tier above it.
Hopefully everything is clear and working as intended but if not please get in touch with me via a comment below or send me an email at [email protected]
I've finished grading and all is well - well, except for the huge amount of seconds which will need homes, but we have plenty of standard units for fulfilment so we can go ahead with everything!
As is normal for my campaigns I will be running a backer store on my own site for a little time before fulfilment starts. Here you will be able to pick up heavily discounted pin seconds, as well as a limited quantity of standard grade pins.
The reason I do this via my own site rather than Backerkit is that inventory is far easier to manage this way - also my payment processing fees are superior, which is why I can offer those seconds so cheap.
Shipping will be free (and you can also grab other items from the site) as the items will be combined with your Backerkit order. Just put the discount code below in the discount code box on checkout and it'll remove the shipping cost.
Please note that the shipment method you select on this site will not influence the shipping method your order is sent with, this will still be determined by Backerkit shipping which should get impounded around the 28th of August (more info on that will follow in the upcoming week).
Please make certain to use the same address for your order as your Backerkit pledge, if I can't match the two orders I will cancel it.
Hopefully everything works as it should but if not, please drop a comment below and I'll look into it as soon as I can!
Thanks again for helping me make these kobolds a reality, I can't wait to send them on their way to you!
I'm still in the middle of pin grading hell (actually, I think I'm not even halfway there), but here are some photos of all the hard enamel pins as promised.
That's all I have to share for now, talk more after I'm done grading everything!
Today the pins arrived in my sticky little kobold hands (after the FedEx import jobsworth decided to charge me far too much import tax for them, but like any Europe based person will know that's just the way the cookie crumbles here and you budget for it).
Now the fun part of grading the darned things starts. I've managed to a little over 300 today which is a decent start, but it's going to take a while as there's... a lot. Once I've finished grading I will be launching the Backer store where you'll be able to buy seconds (and maaaaybe some standard grade) to add to your pledge. A future update awaits.
Anyway, I haven't taken photos of all the pins yet, just checked if all the designs are here (they are), but I can share a couple of photos.. I'm personally stupidly excited about the soft enamel pins - my camera doesn't actually manage to show how neon the colours are but trust me, the colours are so vibrant irl.
You can expect some more photos in the next couple of days, but for now have these and I'll see you again in the next update real soon!
Our bright kobolds
Onwards to slay some adventurers!
Tubs and tubs of pins to grade...
