Dual Destinies: A BG3 Pin Series

Dual Destinies: A BG3 Pin Series

A collection of pins representing the fates of each BG3 companion.
Edit
$26,786 πŸŽ‰
of $1,000
447
backers
Project Ended
Ended on at
Share

Share

Twitter

Bluesky

Facebook

Copy Link

pin-quest

This project is part of βš”οΈ Pin Quest: Myths and Monsters πŸ‰, which runs from June 10th - June 26th 2025. Learn more β†’

Edit

Introduction

Hello there! I’m Mary, known as UltraInfinite online. This is my tenth pin campaign, to fund the creation of Baldur's Gate 3 (BG3) enamel pins. 

I have already run five Kickstarter campaigns to fund the creation of a variety of enamel pins, as well as four Backerkit campaigns. Most of my pins are available on Shopify, Etsy, or with my stockists. Here are a few recent designs:
Edit

How Backerkit Works

  • Backerkit will not charge you unless the campaign reaches its funding goal.
  • You can change your pledge amount at any time before the campaign ends.
  • Surveys will be sent out once the campaign has completed so you can pick which designs you would like.
  • You will receive updates on production and fulfillment as they progress, through your Backerkit email or the Community tab on the campaign page.

Once backers have received their pledges, any extras will be available after the campaign; but at a higher price. Missed the campaign or can't pledge? See the Survey section for more details on how else to get the pins.

Pledge Level Discounts

Please note that the pledge levels for six pins and above have access to discounted pin addons. The discount will not be applied retroactively if you purchase pin addons, you must switch pledge levels; but you will be able to switch pledge levels in the survey if you change your mind later. The discounted addon is available only during the campaign.
Edit

The Pins

Here are the pin designs and details.
  • Pins will be hard enamel except where noted otherwise.
  • Pins come with backing cards and rubber clutches
  • Each pin will have at least two pin posts unless otherwise specified.

Our initial goals are to fund pins inspired by the good and bad endings for each BG3 Origin companion. 

⭐ Spoilers ahead if you haven't yet played or finished BG3! ⭐

First up at $1000 is Shadowheart with her Selunite and Dark Justiciar paths. The Selunite pin has silver plating and is 1.9 inches long. The Dark Justiciar pin has black nickel plating and is 1.77 inches long.

Next to be funded at $2000 is Lae'zel with her Rebellion or Ascension endings. The Rebellion pin has black nickel plating, and is 2.2 inches wide. The Ascension pin has gold plating and is 2 inches wide.

Karlach is up next at $3000 with her Return to Avernus and Death endings. The Return to Avernus pin is 2.5 inches long and is available in black nickel plating with hard enamel; or blue chrome plating with soft enamel and epoxy. The Death pin has black nickel plating and hard enamel, and is 1.8 inches long.

Now onto the boys! First up is Wyll, as the Blade of Avernus or Grand Duke. These pins will be funded at $4000. The Blade of Avernus pin is 2.4 inches long; the Grand Duke pin is 2 inches long. Both pins have black nickel plating.

Next up to be funded at $5000 is Gale, as Professor or God. The God pin has silver plating and is 2.5 inches long; the Professor pin has black nickel plating and is 2 inches long. Both pins will have screen print.

Finally we have the ever-popular Astarion, with designs for his Spawn and Ascendant endings. These pins will be funded at $6000. The Spawn pin is 2 inches long and is available in red chrome plating with soft enamel and epoxy; or black nickel plating with hard enamel. The Ascendant pin is 2.2 inches long, it is available in black nickel or gold plating.

At $7000 we will fund Halsin and Minthara pins. The Halsin pin has black nickel plating and screen print. It is 2.2 inches long. The Minthara pin is 2.3 inches long, with black nickel plating.

At $8000 we will fund Jaheira and Minsc (and Boo!) pins. Jaheira has blue chrome plating, soft enamel, and epoxy. It is 2 inches wide. Minsc has rainbow plating, soft enamel and epoxy, and screen print. It is also 2 inches wide.

Finally at $9000, an Aylin and Isobel design will be made available. This pin will be 2.5 inches long and have silver plating.
Edit

⭐ New Stretch Goals

The following older designs have been added to the campaign. First up are reprints of the Gale, Karlach, Wyll, and Shadowheart pins. These will be funded at $12K.
  • Gale is 2 inches long with recessed metal details and screen print. He is available in black nickel or silver plating.
  • Karlach is 2 inches long with glitter accents, and is available in black nickel or gold plating.
  • Wyll is 2.3 inches long, with black nickel plating and screen print.
  • Shadowheart is also 2.3 inches long, and features gold plating.

At $14K we will fund reprints of the old Astarion and Lae'zel pins. Please note these pins are produced with a different manufacturer; they may not come with backing cards and could be mixed grade, though backers will get the best of the batch.
  • Astarion is 2.5 inches long, and is available in red chrome with soft enamel & epoxy; or gold plating or black nickel plating with hard enamel.
  • Lae'zel is 3 inches wide and features black nickel plating as well as three pin posts.
Recolors of some of the older Shadowheart, Gale, Wyll, and Lae'zel designs will be funded at $15K.
  • Shadowheart will be made available in two new variants: silver plating with glitter, or rainbow plating with soft enamel and epoxy.
  • Gale will be made available in gold plating.
  • Wyll will be available in gold plating with glitter accents.
  • Lae'zel will be made available in gold plating with gradient enamel.



At $16K we will fund pins of Scratch and the Owlbear. Both pins will have gold plating, Scratch will be 1.5 inches wide and Owlbear will be 1.7 inches wide.

Pins of Alfira, Raphael, and Zevlor & Orin will be funded at $17K.
  • Alfira will be 1.8 inches long with black nickel plating and red glow accents.
  • Raphael will be 2.2 inches long with black nickel plating.
  • Zevlor & Orin will be 3 inches long with red chrome plating and soft enamel with epoxy. It will be produced with a different manufacturer and may not come with a backing card.



At $21K we will fund curiosities pins themed after the different Dungeons and Dragons classes. These pins will feature gold plating and come in a variety of sizes with different effects.

At $23K we will fund the Origin companions as cat people, and you will also be able to purchase the Tiger Karlach pin as an addon.
Edit

More Characters to Come!

Is there a character you really want to see as a sticker or pin? Leave a comment or upvote on this community post, and you may see them added to the campaign!
Edit

Campaign Freebies

Each pledge will include a sticker of the most popular design (to be determined after surveys are submitted), and a postcard print featuring artist credits on the back.

Returning backers will get a Withers & Arabella Sticker sticker; early bird backers, who pledge in the first 48 hours of the campaign, will receive the Emperor sticker.
Edit

Cross-Collab Freebie Pins

I'm happy to share that Dual Destinies is partnered with The Cats of BG3 by Cosmic Kristen Designs to offer freebie pins as part of our campaigns. If you pledge to The Cats of BG3 as well as Dual Destinies, you will receive a freebie pin from each campaign.

If you qualify for the free Tiger Karlach pin, it will be added to your survey post-campaign (likewise for the Karlach pin from The Cats of BG3).
Edit

Addons

Want to add more pins to your pledge? To add pins to your pledge, select them from the Addons menu.

You may also add an additional sticker to your pledge. The following sticker designs are available:




The following sticker sheets are available. These will all have a matte finish.
Edit

βš”οΈ Pin Quest: Myths and Monsters πŸ‰

Time to get questing! Welcome to Pin Quest 2025: Myths and Monsters

From June 10 to June 26 join us on our journey for cool pins. This year's event is themed around myths and monsters, so as you explore all the wonderful paths before you be careful the only things following you back are your companions.


Want a reward for your hard work?

Well we have the thing for you! When you finish three or more quests (pledge to three or more campaigns) you will get a Reward from each one! This can range from spell bottles, to books, to companions, to anything we think will help you as you travel. Here's the Pin Quest reward from this campaign:

Looking for more campaigns to pledge to? Check out these other Pin Quest campaigns below!











Edit

Shipping

Rewards will ship via USPS with tracking. Be sure to check your address is correct, replacements or refunds will not be given if you provide the wrong shipping address.

Shipping will be charged after the campaign, when items are ready to ship. Please note that the pledge amount during the campaign does not include shipping cost.

Once items ship, they will take about 1-2 weeks to arrive for domestic (US) backers, and 4-6 weeks for international backers.

Notice for international backers: Backers are responsible for any customs fees or taxes that may be placed on international orders. No refunds or replacements will be given if your package is lost or returned to sender as a result of not paying these fees. International mail service has been suspended for some countries. Backers are responsible for confirming if service is suspended. If I am unable to ship to you I will refund your pledge, minus any fees and taxes.

I have added new reduced shipping rates for international destinations! These rates are lower than in my shops or previous campaigns; however they do not include insurance and shipping time may be extended by 1-4 weeks. If you prefer the previous shipping method, an upgrade will be available in the post-campaign survey/preorder store to switch to that instead.

Shipping will be flat rate. Shipping prices, which will be added after the campaign in the post-campaign survey, are available below:
  • United States $5
  • Mexico $14
  • Canada $11
  • Australia $14
  • UK $14
  • All other countries $14
Edit

The Survey

Once the campaign ends, surveys will be sent out for backers to choose their pins and other goodies. These surveys will be sent to your Backerkit email, so please make sure you are able to access that email. We will be using Backerkit to coordinate rewards.

Using Backerkit, you can add to your pledge if there are additional campaign items you'd like; or preorder pins if you missed the campaign. However, it's best to pledge for them during the campaign to help unlock goals.

Once pins are in-hand and ready to ship, backers will receive photos of the pins and will be allowed to make changes to their survey if desired. If there are an insufficient number of pins or other items to accommodate these changes, you may receive a B-grade pin, be asked to select a different item, or have your pledge delayed several months while more are manufactured. At this time, campaign backers and preorder backers will be charged for any addons via Backerkit. Please see the Timeline section for an estimate of when pins will ship.

How the Survey Works

The first part consists of survey questions: where you answer survey questions depending on your pledge level. In this example I have pledged for one pin and I select it from the available options in the dropdown menu. Only the designs shown on the campaign page will be available from this menu. If I pledged for two pins, I’d answer two questions with a selection, and so on.

Example survey question from Angelology IV.

The second part is the survey addons: where you can select your addons and purchase additional merch. It is in this section that other designs will be up for preorder, depending on order quantity.


Missed the campaign?

Once the campaign has ended, a Backerkit preorder store will be opened for a limited time. To track the campaign progress, preorder backers are recommended to keep an eye on the campaign page to see what updates are being posted; or subscribe to my social media to see previews of the items when I have received them.

Once pins are in-hand and ready to ship, preorder backers will be charged for any addons via Backerkit. Please see the Timeline section for an estimate of when pins will ship.

Once the preorder store closes, you will need to wait until post-campaign leftovers are available.

After backers have received their rewards, any leftovers will be made available with my stockists, but at a higher price. International shipping to most destinations is available through some of my stockists.
Edit

Timeline

There may be changes to this timeline, please check the campaign updates for the latest information.
  • June 10 2025: Campaign launches!
  • June 26 2025: Campaign ends.
  • July 1 2025: Surveys are sent out to backers. 
  • July 13 2025: Surveys close. These may be edited shortly before pins are ready to ship if you change your mind about some pins after seeing photos.
  • July 2025 - August 2025: Funds are released. Orders are placed. Pins and other items go into production and are shipped to me.
  • September 2025: Pins are checked for quality, then shipped to backers. For my complete pin grading policy, please see my About Page.
Edit

Frequently Asked Questions

Please see the FAQ section of the campaign page.

If you have any issues with your survey or other urgent concerns: please contact Backerkit support. Backerkit support will forward your message to my email. Do not message me on my shops, social media, or comment on the campaign page - if you do that I may miss your message or lose track of it (feel free to comment for any non-urgent issues of course). 
Edit

Risks and Challenges

Manufacturing times are approximate and delays are possible. Backers will be notified if there are any unexpected delays, updates, or other issues.

Design changes may be made depending on pin design. This may include adjustments to colors and linework. I will do my best to produce pins that match these designs as closely as possible. Differences between the final items and the mockups are to be expected.

I will be using USPS to ship backer rewards. International mail service has been suspended for some countries. Backers are responsible for confirming if service is suspended. Backers are responsible for any customs fees. Refunds/replacements will not be provided if a package is rejected by customs and lost, as a result of failure to pay these fees. Please see the Shipping section for more information. If I am unable to ship to you I will refund your pledge, minus any Backerkit fees and taxes.

Exchanges or replacements may be offered on a case-by-case basis. Backers are responsible for return shipping. For my complete pin grading policy, please see my About Page.
If you believe that this project is not in compliance with BackerKit’s Community Guidelines or Terms of Service, you can file a report by sending a message via this link: Report this project