Latest from the Creator
Dynamite Entertainment
4 days ago
Terminator Update 8-7-25    
We have been working with the printer to get the final kinks worked out of the print files.  Without going into too much detail - there was an embedded image problem that sho...
9
0
13
Dynamite Entertainment
about 2 months ago
Terminator Printing Update & Status 6-24-25
The printer just checked back in with us about the corrections that were needed on the print file.  The first pass consisted of a few dozen minor problems with the files that...
10
1
18
Dynamite Entertainment
about 2 months ago
Printing Update On Terminator Graphic Novels
We just heard back from the printer on their "preflight" work of prepping printing files to go to press.  They reported a few dozen small issues that need to be resolved with...
2
0
2
Dynamite Entertainment
2 months ago
Printing ETA & Metal Slipcases Being Finalized
The factory is working on the final details of the Terminator Metal Slipcases and the ETA for printing of the omnibus editions.  They have asked for an additional week to put...
9
0
6
Dynamite Entertainment
3 months ago
All Pledge Manager Surveys Sent Out To Backers
Quick update on The Terminator program.  The survey smoke test was successful and we have now sent it out to the full list to all backers.  Please check your Backerkit associ...
2
2
15
Dynamite Entertainment
4 months ago
Pledge Manger Open - Smoke Test Begun
Our pledge manager for The Terminator is now approved and open.  We just sent out the smoke test - which is about 5% of surveys to make sure everything is running smoothly.  ...
7
0
13
 
PROJECT UPDATE
Dynamite Entertainment
CREATOR
4 days ago

Project Update: Terminator Update 8-7-25    

We have been working with the printer to get the final kinks worked out of the print files.  Without going into too much detail - there was an embedded image problem that showed up when they started the process of prepress.  We needed to take the files back and have the graphic design team go into several dozen pages and make changes to the files to remove the remnants and clean the print files.  That moved us back to the beginning, having to start the prepress process again from scratch with the new files.  

We apologize that the issues have moved our expected on-press time back by several weeks.  The files have been cleared, and we are looking at starting up the process again at this time.  

The only issue currently pending are the prototypes of the metal slipcases which are being worked on separately from the print books.  Those too are very close to starting up the factory manufacturing process.  

The printer will be confirming with us their available press time within the next few days. As soon as we can give a projected printing and shipping date based on their input, we'll post another update with those details.  We hope to have this information by Tuesday of next week.  Thank you.
13
Share

Share

Twitter

Bluesky

Facebook

Copy Link

Edit

Thundercats which is a much more recent project is getting updated. Could we get an update please?

0
Share

Share

Twitter

Bluesky

Facebook

Copy Link

Can we please get a project update? With everything going on with Diamond you could elevate our concerns with an update.

7
Share

Share

Twitter

Bluesky

Facebook

Copy Link

With the recent news of Dynamite being unable to make payroll in the next week, and the court rulings, what can we expect now? This is already being dragged out far longer than it probably should have been, do we need to wait even longer? Are refunds even a feasible option at this point?

3
Share

Share

Twitter

Bluesky

Facebook

Copy Link

PROJECT UPDATE
Dynamite Entertainment
CREATOR
about 2 months ago

Project Update: Terminator Printing Update & Status 6-24-25

The printer just checked back in with us about the corrections that were needed on the print file.  The first pass consisted of a few dozen minor problems with the files that we worked to get fixed.  Now the second file pass has come back and we are down to just 8 problems which are being adjusted to meet the specifications of the printing process.  Our production team is working on getting those changes made and uploaded to the printer for another pre-press pass review.  We expect to hear back on that shortly.

The printer is also working on the prep to have the different cover editions printed.  We received a few notes on the covers where certain details and bleeds need to be revised.  We're working on those changes right now alongside the interior adjustments to get us to a point where the covers and interiors are ready for press.  Based on our progress we're expecting these issues to be resolved in the same timeline.  

We are also waiting for photography of the metal slipcase prototypes.  We know the printing process for these real metal slipcases is complicated but the printer is keeping us updated on their progress with the factory and the prototypes.  

As soon as more information is available we will post it up to keep you in the loop on the progress.  At the completion of the print ready process we should have the timeline for the manufacturing of the books to share.  
18
Share

Share

Twitter

Bluesky

Facebook

Copy Link

Edit