The Mighty Mutants & Masterminds Map Pack #1 - PART 2! The Pacific Museum of Art!

For those who qualify for the Beat the Hump Incentive, you should have received your SECOND of five downloads for the Mighty Mutants & Masterminds Map Pack #1.

There is a download for the V13 version (using Ripoper93's Levels system) and the v14 version (using the new native Levels system) of Emerald City's own Pacific Museum of Art available to you via email from Backerkit or in your Digital Downloads on Backerkit. Make sure to check your email.

Also ensure to review the included Journal in the Compendium for all the ins and outs of the package complete with a level by level walk-through of the location.

The Pacific Museum of Art map set depicts a large, multi-level modern museum centered on a dramatic main gallery, the massive zigzagging Switchback ramp, side exhibition halls, and a loading area suitable for thefts, chases, and running battles. Its open spaces, glass walls, security gates, galleries, and valuable exhibits create plenty of opportunities for vertical movement, improvised cover, environmental hazards, and collateral damage. The set works especially well for superhero encounters where the heroes must balance stopping villains with protecting civilians, priceless artwork, and the museum itself. 

I have to warn you, this file is BIG so it will take extra time to download and use. Unless you know you are going to be using multiple levels in a combat, it is suggested that you use the individual level maps provided.

Thank you again for your patronage. 

The Official Mutants & Masterminds System Beta v13

• Increased Range Extra made Power sheets with Power Effects with Ranged range not render properly. 
• Book Source Data was not stored for items dropped from a Compendium
• Duplicating/Drag-dropping items would retain the stored Identifier
• Power Effects contained by Powers in the Powers Compendium had stored Identifiers
• Advantages in the Compendium were missing their Identifiers
• Transform Power Effect's options increased rank instead of cost
• Movement Power Effect were not enabling movement or increasing rank
• In Edit Mode, clicking into a Defense's area in the Character sheet - Main Stats tab rolled it, which it should not do.
• Subtle Extra had its options increase the cost instead of granting a rank
• Modifiers with flat and flatPerRank costs could scale with their effect's rank
• Under Damage, Bruises (Non-Lethal) and Injuries (Lethal) were not summed up
• Penalties to rolls were displayed as positive values
• Attack chat cards displayed the wrong DC value
• Advantage item sheets displayed a duplicate Identifier input
• Outcomes could not be manually created
• Speed Power Effect cost 2PP instead of 1PP per rank
• Damage did not reduce subsequent Toughness checks
• Modifiers' Book Source data could not be entered
• Roll Table results were not rendered
• DC for Active Defenses was not calculated properly
• Ranged action area templates were locked at distance
• Character Actions did not reset after each turn/round/encounter
• Combat Advantages like Accurate Attack did not increase the number of checkboxes in the combat tab
• Impervious cost/rank was limited by power effect rank
• Device Containers calculated their cost reduction incorrectly (see Notes below)
• Critical Success on Skill rolls did not increase their total
• Action messages could fail to render when reloading the page
• Luck Advantage had a maximum rank of 1
• Roll prompt buttons in messages were displayed to users not permitted to roll them
• Attacks with a Critical Success did not increase the resistance DC by 5
• Attack actions were rolled as plain skill rolls instead of as actual attacks
• Outcome sheets were missing labels for type-specific fields.
• Chat Card issue with unlinked tokens was causing the game world to crash.
• Accurate Extra was not correctly noted in the Chat Card combat bonus list properly.
• Whispered Chat Messages did not have a special background color to indicate it was whispered
• Enhanced Trait’s option ranks could not be negative, preventing reduced traits
• Ranged Combat: Thrown was configured to have a range of “close”
• Improved Initiative Advantage did not increase the character’s initiative
• Ranged Attack Advantage did not increase ranged combat

• Power Framework now display tooltips describing their function in the Item Creation Dialog
• Add World Setting to configure how Removable’s  cost discount is rounded. (see Notes  below)
• Skills and their rolls now display all their bonuses individually, allowing you to see what individual bonuses lead to the bonus total.
• Dropping Power Effects into Character and Power sheets now displays a more detailed error messaging when the target cannot contain the dropped Item.
• Default actions for Close Combat: Unarmed, Grab, and Ranged Combat: Thrown are now added when creating new Characters.
• Added World Setting for GM to set Power Level for all starting characters, defaults to 10.. 

• Improvements to Variable 
• Improvements to the Strength Array
• Improvements to the Linked Power containers
• The Measurement Calculator
• Vehicle Sheets
• HQ Sheets
• Herolab Importer
• Mastermind Maker Importer
• Character Sheet Improvements for ease of use!
• MUCH, MUCH MORE! :)

• Creating a Character from each Archetype from the Deluxe Hero’s Handbook and variations thereof. Was there a character type difficult to pull off?
• Pick a set of powers from Power Profiles and do the whole set. Was anything Hard/impossible to make? 
• Use each of the Power Frameworks. Were they easy to use? Were they intuitive to use? Why/Why not?
• Use Actions out of Combat to ensure they execute what they are supposed to do.
• Use Actions in a Combat to Test Action Use  to ensure they execute what they are supposed to do.
• In Combat, make a Close and Ranged Damage attack from your Actions menu on the Combat Tab
  • Ensure Bonuses, Difficulty Class, and Successes are all properly calculated
  • Make the Target’s Toughness Resistance check versus a successful Damage attack 
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated
  • Check what Damage will be applied
  • Ensure the Damage is applied properly to the character after hitting the apply button.
• In Combat, make a Damage Area Attack from your Actions menu on the Combat Tab.
  • Place the template over the targets you wish to affect
  • Apply the Damage Area Attack
  • Make the Target’s Dodge Resistance check versus a successful attack 
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated (Half effect if successful, full effect if failed) before and after the roll.
  • Make the Target’s Toughness Resistance check versus a successful Damage attack 
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated
  • Check what Damage will be applied
  • Ensure the Damage is applied properly to the character after hitting the apply button.
• In Combat, make a Close and Ranged Affliction Attack from your Actions menu on the Combat Tab.
  • Ensure Bonuses, Difficulty Class, and Successes are all properly calculated
  • Make the Target’s appropriate Resistance check versus the successful attack Affliction effect
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated
  • Check what Conditions will be applied
  • Ensure the Conditions are applied properly to the character after hitting the Apply button.
• In Combat, make an Affliction Area Attack Attack from your Actions menu on the Combat Tab.
  • Place the template over the targets you wish to affect
  • Apply the Affliction Area Attack
  • Make the Target’s Dodge Resistance check versus a successful attack 
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated (Half effect if successful, full effect if failed) before and after the roll.
  • Make the Target’s appropriate Resistance check versus the successful attack Affliction effect
  • Verify the Bonuses, Difficulty Class, and Successes  are all properly calculated
  • Check what Conditions will be applied
  • Ensure the Conditions are applied properly to the character after hitting the Apply button.
• REALLY put the system through the paces. 

1. Launch Foundry VTT and open the Setup screen.
2. Confirm that you are running Foundry VTT Version 13. Version 14 is still under development and is not currently supported.
3. Select the Game Systems tab.
4. Click Install System.
5. Copy the Mutants & Masterminds 3E Beta Manifest URL provided through BackerKit.
6. Paste it into the Manifest URL field at the bottom of the installation window.
7. Click Install and allow Foundry to download and install the system.
8. After installation, create a new world and select the Mutants & Masterminds system from the Game System menu.

1. Make sure Foundry VTT Version 13 is active for your Forge game. Version 14 is still under development and is not currently supported.
2. Open The Forge and go to the Bazaar tab.
3. Copy the Manifest URL for the Mutants & Masterminds 3E Beta from your BackerKit email or Digital Downloads.
4. Click Install from Manifest in the upper-left corner of the Bazaar.
5. Paste the link into the field labeled Enter the Manifest URL of the package to install.
6. Make sure the Install from the Bazaar if the package is found toggle is turned off.
7. Click Start to begin the installation.
8. Once installation is complete, create or configure a Version 13 world using the Mutants & Masterminds system.

• Create character archetypes and variations.
• Recreate a favorite character as a test.
• Build powers by combining effects and modifiers.
• Test power packages, arrays, variables, and other power containers.
• Use the Hero Point Manager.
• Use the Extra Effort Manager.
• Perform actions outside combat.
• Test action use and tracking through the Combat tab.
• Make Damage and Affliction attacks.
• Test area-effect Damage and Affliction attacks.
• Drag and drop Minions and Sidekicks.

DOUBLE-WHAMMY WEEKEND!

The Official Mutants & Masterminds System Beta v13 - Version 0.2.0 is OUT!

Beta , Part II.... THE SEQUEL!!!

BUT THAT'S NOT ALL!!!

The Pacific Museum of Art 

• Bug reports
• Suggestions
• Module conflicts

• If the problem still occurs with every optional module disabled, report it as a Bug.
• If it only occurs while another module is enabled, report it as a Module Conflict and include that module’s name and version.
• If you have an idea for improving the system’s interface, layout, workflow, or functionality, submit it as a Suggestion.

1. Launch Foundry VTT and open the Setup screen.
2. Confirm that you are running Foundry VTT Version 13. Version 14 is still under development and is not currently supported.
3. Select the Game Systems tab.
4. Click Install System.
5. Copy the Mutants & Masterminds 3E Beta Manifest URL provided through BackerKit.
6. Paste it into the Manifest URL field at the bottom of the installation window.
7. Click Install and allow Foundry to download and install the system.
8. After installation, create a new world and select the Mutants & Masterminds system from the Game System menu.

1. Make sure Foundry VTT Version 13 is active for your Forge game. Version 14 is still under development and is not currently supported.
2. Open The Forge and go to the Bazaar tab.
3. Copy the Manifest URL for the Mutants & Masterminds 3E Beta from your BackerKit email or Digital Downloads.
4. Click Install from Manifest in the upper-left corner of the Bazaar.
5. Paste the link into the field labeled Enter the Manifest URL of the package to install.
6. Make sure the Install from the Bazaar if the package is found toggle is turned off.
7. Click Start to begin the installation.
8. Once installation is complete, create or configure a Version 13 world using the Mutants & Masterminds system.

RELEASE DELAY

News about The Official Mutants & Masterminds System for Foundry VTT

v14 Implementation May Be Delayed

The next map for the Mighty Mutants & Masterminds Map Pack- THE PACIFIC MUSEUM OF ART coming this weekend!