By pledging to this campaign you are stating that you agree to our Terms & Conditions and understand all the information that follows under the headings below: How do I contact you? Color, Size, and Use Notes Pin Grading System Packaging Extra Rewards Shipping Backer Responsibility Reward Forfeiture Refunds/Exchanges

If you have any questions, please feel free to reach out to us via email: [email protected] BackerKit does not notify us of new comments or discussion in a timely manner. Email is the best way to reach us with an urgent question. We'll do our best to get back to you as soon as possible!

While we have been in business for nearly a decade, the pins in this BackerKit have not yet been manufactured. The designs seen on this page are mockups, which means the final product may vary in color and size. From our experience, the majority of our products turn out looking like the mockup design. Different monitors, phones, and other devices have different settings which means coloration may vary between screens. Each mockup details an estimate of the product's size. Sizes refer to the general height or width of the longest side of the item. The actual size of the physical product may vary. We use a Pantone Solid Coated book to choose the colors for our pin designs. Our manufacturers use those Pantone numbers to know which colors to mix by hand and where to apply it, however, colors may vary from a paper Pantone swatch and an enamel Pantone color. Glitters, translucent enamel, sand blasted enamel, pearl enamel, and metal plating colors may vary on the physical product.

We have a high standard for quality — products offered for sale will be one of two grades: Standard grade pins are free of major defects. As all pins are handmade, they may exhibit minor and less noticeable imperfections. This may include stray glitter, superficial tiny bubble in the enamel/epoxy, superficial scratches to metal (especially large metal surfaces), metal imperfections on the side/back of the pin, etc. Seconds grade pins have larger imperfections that are more noticeable. All orders will be fulfilled using Standard Grade pins. Additional examples of Standard Grade imperfections are as follows, but not limited to: - Small buff marks, scuffs, or scratches on metal/enamel - Small specks, pores, or bubbles anywhere on the pin - Slightly low or uneven fills - Slightly misaligned screenprinted details (for pins with screenprinting) - Slight variations in the distribution of glitter - Slight defects in text (this is usually only in pins with small text)

Instead of conventional backing cards, pins are packaged in their original production bags inside an Oddment & Tweak branded envelope to prevent creating excess packaging waste.

Returning Backer Rewards are given to backers of Level Up who also backed one of our previous campaigns. Backers will receive a free bookmark. Pre-Launch Follower Rewards are given to backers who followed the campaign prior to launch. Backers will receive a free mini pin. Early Bird Rewards are only available for the first 48 hours of the campaign! Backers will receive a free mini pin. Collaboration Rewards • Pledge to our cross-collab with Sunset Road Co to receive a free mini pin. • Pledge to 3+ Bookworm Banner projects to receive a free bookmark. Please see the Story section of the campaign for reward design details. If you qualify for any of the rewards above, there is no need to do anything within your pledge or survey to receive them. Once you successfully fill out your post-campaign survey and pay for shipping (and any applicable add-ons), the reward(s) will automatically be added to your order when shipped out. Please note: "Donation ONLY" and "Add-on Only" pledge-levels are NOT eligible for any extra rewards or collaboration rewards.

Shipping costs will be charged to you after the conclusion of the campaign and separately through your post-campaign BackerKit survey. Shipping costs are weight-based and will be calculated based on the weight of both your pledge and applicable add-ons. All orders will be shipped via USPS and will come with tracking. USPS Ground Advantage packages have an estimated shipping turnaround time of 3-7 business days within the United States and 7-21 business days for international packages. Please know that once we ship a package, it is out of our hands. We can only see the same tracking information you can and are not responsible for lost packages. We recommend contacting your local postal provider for more details or to file a claim. This campaign will ship only to the United States and Canada. If you manage to pledge from outside one of these countries, your order will be canceled and refunded post-campaign. Please note that we do not collect any duties, taxes, or tariffs for international packages. Those fees would be collected upon delivery of your package if required by your country.

As Creators, we are only able to communicate with Backers through project updates and reminder emails. All email correspondence will be sent to the email on file for your pledge. As a Backer, it is your responsibility to check for and read project updates, as well as check for survey emails. You are responsible for completing your survey and paying for shipping fees (+ add-ons if applicable) in a timely manner in order to receive your rewards. Failure to complete your post-campaign survey may result in forfeiture of your pledged rewards. (Read more about Reward Forfeiture below).

Pledges ship once Backers complete the post-campaign survey and pay for pledges, add-ons (if applicable), and shipping. Once project shipping is completed, Backers will be notified via a campaign update. This campaign update will contain a final survey completion reminder. If your survey is not completed and your shipping costs remain unpaid by July 31, 2026, you will forfeit your pledge payment and rewards. We will not fulfill forfeited rewards and pledge levels after the completion date.

BackerKit Crowdfunding is an all-or-nothing collaborative funding platform. Creators share their project ideas and set a funding goal with a deadline. Backers pledge money to help make the project possible.

If the project meets its goal by the deadline, pledges are charged and the creator moves forward. If it doesn’t, no one is charged.

Pledging in crowdfunding is a commitment to support the creation of a new product or project. Unlike a traditional purchase, you're not buying an item that already exists. Instead, your contribution helps bring a creative idea to life, and in return, you typically receive rewards (such as the product itself) as a thank you for your early support.

1. Select a pledge level with the reward(s) you would like to receive
2. Select any add-ons
3. Confirm your pledge!

• You are charged only if the campaign meets its funding goal.
• Charges happen when the campaign ends, not when you pledge.

After the campaign ends, you'll receive a survey to pay for any applicable shipping fees, calculated based on your shipping address.

Pay Over Time allows you to split your pledge into multiple payments over a set period. Your card will be charged according to the payment schedule (four monthly payments). Only available for projects that enable this feature. Learn More »

Only the project creator and the BackerKit Support Team can see your pledge and contact information. Other backers and the public cannot see your individual pledge amount or personal details.

You can change or adjust your pledge level and add-ons before the campaign ends. After the project concludes, cancellations or changes are at the creator's discretion and may depend on what stage the project is in.

Overtime Mode extends your campaign past its original end time to give backers a final chance to make their pledge. It will add an additional 10 minutes past the end time as long as pledges keep coming in. The campaign will end when there is a 10-minute period without any new pledges.

For specific questions about your pledge or the project, you can view the Project FAQ below, search for your answer within the project, or send a message to the BackerKit Support Team or to the project creator.