Some pins have already shipped, I was waiting on a restock for Joker and my first batch of Futabas - but all pins have arrived! Will be charging all orders and shipping them ...
0
0
0
Jin
25 days ago
Major Update
Hello, just a short update.
This is probably one of the biggest things. So, earlier last year I had mentioned that my old manufacturer took my money (around $3,000), refused...
2
0
2
Jin
about 1 month ago
1/22 Update
Hello everyone!
I have Makoto/Yusuke/Haru/Ann set to arrive tomorrow and I have sent a final notice to lock your orders and it will be charged shortly afterwards. Please tak...
0
0
0
Jin
about 2 months ago
1/5 Update
Happy New Year!!
Hello! Here are some updates, all Persona pins are to be going under screenprinting in around a week.
The Jack Frost Latte pin is fully complete. The Perso...
1
0
0
Jin
2 months ago
12/18 Update:
Hello everyone!
I have news in regards to this campaign as well as Pintopia. I will only be communicating what is necessary for this campaign here since I am undergoing a di...
1
0
0
Jin
3 months ago
12/09 Update
Hello everyone,
I have an unfortunate hiccup that is occurring with the project in where the manufacturer has taken my money and stopped responding to me. Note that I am not ...
Some pins have already shipped, I was waiting on a restock for Joker and my first batch of Futabas - but all pins have arrived! Will be charging all orders and shipping them out in the following week :)
This is probably one of the biggest things. So, earlier last year I had mentioned that my old manufacturer took my money (around $3,000), refused to make my pins, and then ghosted me. They did not make any of my pins after I paid them and stopped responding. I've been fighting behind the scenes because Paypal denied my claim and I've been dealing with my bank instead for the past 2 months. This isn't really anything that the backer really needs to know so I'm not going to bore you guys with the details, but essentially once they saw me initiate a chargeback, they refused to release my molds (the molds that are used to make enamel pins) that I legally own (the factory does NOT own my molds, they are mine because I paid for them). Because I am in the US and they are in China, there's no way for me to hold this up legally. So they now held my molds, this is particularly concerning because it's also the easiest way to make bootlegs of my pins and with how unprofessional this company is - I do think that I am at some risk of them either selling my molds to another factory to make bootlegs, or making bootlegs themselves. In the case that you see any of my designs sold in mass end up on anywhere OTHER than my own official sites, please report them! They are not being sold by me.
But anyways, also because of this, I had to remake some pins from before from scratch (like Floral Sumi, Joker, Black Crow, and Violet - i have yet to remake Floral Aigis). This meant that between the two factories there is this discrepancy, notably that the facial features for the new factory is thinner which is actually good for the new Persona pins because it means that the features are finer. But for those of you who own previous ones (this is ONLY for Violet, Joker, Black Crow, and Floral Sumire) there is a slight discrepancy between the new version and old version.
The new one is on the left (<-) the one I'm holding with a finger on it. The colors are also a bit more different because all of these colors are hand-mixed, so there is a slight discrepancy between the two, but I actually prefer the new pins. I did want to point this out in the case that any of you were confused by this and I wanted to communicate this sooner than later.
So with this being said:
Some orders will be shipped soon. Not all pins have arrived, if your order is charged, your order is scheduled to ship soon. Please feel free to reach out to me privately through [email protected] if you would like to pay for some items to be shipped first and I can see if I can split your order up (this depends on what you've ordered and you will need to pay for shipping twice if you'd like to split it in in-stock items and out-of-stock items).
The pins that have not arrived are being held with my manufacturer for some other pins to be completed. I estimate that this will be received in maybe a month due to some issues with production with my Futaba pins, remade Joker pins, and some other pins for my other project.
Jack Frost latte pins will not have backing cards due to me not having the physical capacity to package freebies right now, I'm really sorry. I'm severely over-worked right now and can't expend the extra energy since I have so many other designs to go through. They will come in the little zip-lock baggies. All other pins will be packaged. So far I've only done some of Ryuji and Yusuke.
The Jack Frost latte pins will come without backing cards in the baggies that they arrived in from the manufacturer.
I've packaged some Ryuji and Yusukes, but there's still a lot of other pins that need my attention.
If I have time I will take some better photos of them in natural lighting, thank you for your patience!
I have Makoto/Yusuke/Haru/Ann set to arrive tomorrow and I have sent a final notice to lock your orders and it will be charged shortly afterwards. Please take a moment to finalize your orders if needed and also make sure that your address is accurate as I'll be going into fulfillment mode as soon as I'm done grading my first batch of pins.
There are still some Persona pins being made and will be shipped to me shortly. This should be within the next 2 weeks. Thank you for your patience during this time!
Hello! Here are some updates, all Persona pins are to be going under screenprinting in around a week.
The Jack Frost Latte pin is fully complete. The Persona pins will be finished before my Girls Who Really, Really Love You campaign pins and will be held until both projects are finished, and afterwards they will immediately be shipped out to me. I'll be grading them and shipping them the same week that they arrive.
I do not have a shipping date for this yet, but when they are ready to ship, you will notice that your orders will be locked and your card will be charged. Please note that at this point in time, I have NOT charged anyone yet for their add-ons or shipping, you have only paid for your pledge. Shipping and add-ons will be charged when they are ready to be shipped out.
All sticker bonuses have already arrived in-hand!
Some images - not all pins are shown but all are all under production. :D
Thank you everyone for your patience! Feel free to reach out to me through comments or email if you have any questions. :)
I have news in regards to this campaign as well as Pintopia. I will only be communicating what is necessary for this campaign here since I am undergoing a dispute with my previous manufacturer.
I am now working with a new manufacturer who has helped me navigate the issues with my previous manufacturer.
I am currently in a dispute with my previous manufacturer who has threatened to hold items that I legally own (like my molds for previous projects) hostage. They can keep it lol - they were asking for over a thousand dollars to release possession of items that I legally owned. In China they legally cannot keep my mold hostage, but since I am international it would've been difficult to protect my work. It would've cost less to just remake all of the molds, so I'm moving on.
If you see any bootlegs, please report them. I have suspicions that they are petty (from what I've seen during my time working with them) and will try to bootleg my pre-existing projects that I made with their factory. I cannot do anything about it legally but I am hopeful to squander what I can, if you are able to assist in reporting potential listings whenever possible, please help. I'd appreciate it!
The Persona pins are due to arrive end of month January through March. Please be patient if the deadline skews from this since we're starting completely from scratch and have to remake the Royal Trio from scratch as well because the previous manufacturer kept my mold.
Stickers and keychains have all been ordered.
I will be joining Pintopia 2026 because all pins are now under production and all have the same estimated time-line of being due end of month January through March. I have faith in my new company and do not believe it will impact how Pintopia 2026 performs since Pintopia 2026 will be handled by a completely different manufacturer that I trust (and was also responsible for delivering 19+ pin designs during Pintopia 2025).
Please feel free to reach out to me if you have any questions, thank you for the support!
