🐍🌹 New designs revealed + Surveys finally coming! 📝
Hola mis amigos!!
I wanted to share an update on Muerte & Magic II and also take the time to say thank you *so so* much for your patience. I know this campaign has taken a l...
7
0
0
Jess | JBlake Design
about 1 month ago
Update + Surveys coming next week! 🇲🇽💖
Hola amigos!
I wanted to share a long and overdue update on Muerte & Magic II. I’m really sorry this campaign has been quiet on my end, there's been a lot happening in the...
10
0
2
Jess | JBlake Design
4 months ago
💖 Thank you for supporting Muerte & Magic II: La Eternidad! 💖
¡¡Hola Amigos!!
Wow, what an incredible Pintober this year! 😻🎉 I wanted to give everyone’s inbox a little break from the end-of-campaign flood of emails, but I couldn’t go...
5
0
8
Jess | JBlake Design
4 months ago
🐺🌙✨ New Pin: Xólotl the Aztec Dog Deity ✨🌙
🐺✏️ New pin reveal!
Meet Xólotl the Aztec god of fire, lightning, and death! In Aztec mythology, Xólotl guided the sun into the underworld every night so it could rise in ...
6
0
3
Jess | JBlake Design
4 months ago
☀️ Pin Reveal: Aztec Sun God! + Poll results~ ☀️
¡Hola Amigos! 🇲🇽✨
I'm super excited to share my updated design for the 2nd stretch goal: Huitzilopochtli the Aztec Sun God!
Huitzilopochtli wielded a mythological fire se...
6
0
7
Jess | JBlake Design
4 months ago
Fully funded 3 Aztec Deity pins!! ☠️🖤🇲🇽 Vote in the new poll!
Wow everyone!! What an amazing first day at launch, thank you so much for the incredible support within the first few hours of Pintober!! 🥰🙏🏼🍬
🎉 Here's what we've unlocked ...
I wanted to share an update on Muerte & Magic II and also take the time to say thank you *so so* much for your patience. I know this campaign has taken a little longer than expected, and I'm here to break down everything for you 🙏🏼
A big part of the delay came down to finalizing the designs for the feathered serpent God of the Wind Quetzalcóatl, and the Goddess of Love and Beauty: Xochiquetzal. I had the entire survey finished and ready to go, I just needed to finalize these 2 last pin designs before I could actually submit the surveys.
I struggled a lot with Xochiquetzal's design, and I went through 3 different versions of her before I was actually happy with how this final version looked. 😫 Here's a visual representation of what it feels like when you have Art Block and everything you draw just isn't coming out good at all 😆
And with that, here's the final 2 pin designs!! 🇲🇽💖
Quetzalcóatl will have rainbow glitter and screen printing details at 3 inches, and Xochiquetzal will have screen printing details at 2.5".
Here's the new collection all together at the correct sizing! 🇲🇽💖
Now that the last 2 pin designs are finished, I've finally submitted the Surveys for their final review!! As long as there's no errors, this approval process is pretty quick :) After the Surveys are approved and the Smoke Tests come back with no issues, surveys will be released to everyone ASAP! 🥳🎉 Keep an eye out on your inboxes!
My Pin Manufacturer is currently on holiday, so this gives us time to gather the final counts and make sure everything is completely ready by the time they return to the office. My order will be one of the first projects they start with when they return, so I'm estimating production will only take about a month and a half after they come back (plus a few weeks for shipping). Once they arrive, I’ll move into grading and fulfillment right away. My convention schedule is also cleared out for this time period so I can put my focus 100% on grading and shipping 💌
Thank you again for your patience waiting and for giving me the time to get these designs 100% perfect 💖 I’m excited and really proud of how they turned out, and I can’t wait to finally bring them to life!!
I wanted to share a long and overdue update on Muerte & Magic II. I’m really sorry this campaign has been quiet on my end, there's been a lot happening in the background and I want to be transparent about the delay if you haven't followed my other campaign updates.
Long story short: the delay came from running 3 campaigns (Pin Quest, Pinned & Preserved, and Muerte & Magic) back-to-back with very little downtime in between campaigns. On top of overlapping campaigns, I was also dealing with several unexpected family emergencies that made it difficult for me to keep everything moving on the original timeline I had planned out.
🙏🏼 The long version for the delay (if you didn't see updates from the other campaigns)
➡️ Back to back campaigns: While running Pin Quest, I was asked to join the upcoming League of Science pin event about a month before launch. I happily agreed, but I didn't fully anticipate how tight the schedule would be in between setting up & running multiple back-to-back campaigns. I originally planned to have more time between Pin Quest and Muerte & Magic to clean up/vectorize artwork, but with the added 2nd insect pin campaign in between, I had to put a pause on certain tasks in order to run these events on time.
➡️ Family emergencies: While running the campaigns, my mom was hospitalized due to a severe spider bite infection that required multiple surgeries to clear out of her system. Thankfully she made a full recovery 🥹🙏🏼 Shortly after this, there was a cancer scare that required more testing back at the hospital, but thankfully that all came back negative. After this happened, my closest grandma passed away which was a very difficult loss to deal with on top of everything.
Once things settled down, I jumped immediately back into my work. Balancing campaign work in between these 2 family emergencies caused some delays getting things started, and I ended up slower to check in than I wanted to be. For that I sincerely apologize 🙏🏼 I just want to be transparent about everything going on behind the scenes so you can understand, and I want to thank you all so much for your patience during this time. I also hope you all are taking care of yourselves too, I know life can be rough to everyone sometimes 💖
💪🏼 The great news is that I'm just about caught up with all the campaign work, and the Muerte & Magic surveys are almost ready for me to submit to Backerkit for review!
After the Backerkit Team returns to the office on Tuesday (Monday is MLK Jr. Day holiday), I'm hoping surveys will be approved shortly after that. Once I get final counts from the Muerte & Magic surveys over to my manufacturer, production will be ready to start ^_^
🐍 Quetzalcóatl + Xochiquetzal pin designs 🌸
🐍 God of wind, learning, knowledge, arts, agriculture, and the planet Venus
🌸 Aztec goddess of beauty, love, fertility, flowers, and arts
➡️ Since there was a lot going on, I had to put a pause on finishing these two last designs. Luckily I'm almost finished and I'll reveal their final designs once the surveys have been released! :)
I've already cleared out my schedule for the rest of this month so I can focus fully on finalizing pin production. After these survey counts are done, everything will go smoothly and consistently from here on out! 🤗 Thank you so much for your incredible patience, understanding and support during this time. It really means the world to me and I am so grateful to have you all here 💖💖💖
I'll send another update when the surveys are officially sent out to everyone!
Wow, what an incredible Pintober this year! 😻🎉 I wanted to give everyone’s inbox a little break from the end-of-campaign flood of emails, but I couldn’t go without saying how grateful I am to each of you for backing, sharing, and celebrating my work during Día de los Muertos!! 🥰🖤
We unlocked so many amazing pins together, let's take a look at the whole Muerte & Magic collection~
Lord Mictlantecuhtli (left), Pintober freebies (top), Alebrije + Xolo Dog (bottom), Lady Mictecacihuatl (right)
Thank you to each and every one of you for making this second part 2 series of Muerte & Magicsuch a huge success!! 🇲🇽💕
**We also unlocked Xochiquetzal, the Aztec Goddess of love and beauty. I'm still refining the line art so I'll release the final pin design in the next update :)
✏️ So what’s next?
For the next two weeks while we wait for funds to process, I’ll be focusing on refining the artwork for the designs. This just involves cleaning up linework, vectorizing it, and picking out the pantone colors so everything is ready to go for production~
In that time, I’ll also be preparing the Backer Surveys! These will be sent out soon so we can collect final pin counts. Once those are mostly complete, I’ll be able to lock in counts and move forward with manufacturing 💖✨
Thank you again from the bottom of my heart for helping me bring these Aztec mythology pins to life 🇲🇽🫶🏼 I can’t wait to see how these turn out!! 😻 Until the next update~
Meet Xólotl the Aztec god of fire, lightning, and death! In Aztec mythology, Xólotl guided the sun into the underworld every night so it could rise in the morning. Because of this, he’s known as the Evening Star 💫
This Xólotl pin is meant to match the Quetzalcóatl pin! Xólotl and Quetzalcóatl are cosmic twin brothers and represent the light and dark phases of the planet Venus. Quetzalcóatl is the light of Venus (morning star), and Xólotl is the darkness (evening star).
The Morning Star of Venus
The Evening Star of Venus
☠️ Pintober Ends Soon! 🇲🇽
This is your friendly reminder that Pintober officially ends in 3 days on the last day of Día de los Muertos!! 🌼☠️🇲🇽 (Pintober ends November 2nd)
Thank you again for being a part of my pin community here and for bringing these Aztec deities to life in this new pin series! I can't wait to get these made!!
🖤 Jess 🖤
➡️ Click the banner here to visit Muerte & Magic! 🇲🇽💖✨
